MATHY-T is a high-performance gear oil additive that is used specifically to improve shifting processes in manual transmissions and differentials.
The addition of MATHY-T in gearboxes and rear axles reduces wear by up to 90% (laboratory test) and contains no solids. Especially for transmission oils of SAE classes 75 to 140 with particularly high compressive strength, also applicable for hypoid oils.
These are your advantages
- Improves the switching effect
- Reduces wear on the gearbox bearings
- Noise is reduced
- Minimizes vibrations
- Prevents damage
- extends the service life
- Very good corrosion protection
- More pulling power
- lowers the operating temperature
Dosage
Normal use
20% MATHY-T Transmission oil additive for transmission oil under normal loads. ExampleFilling quantity 2.0 liters: 1600 ml transmission oil according to manufacturer's specifications + 400 ml MATHY-T
High performance utilization
30% MATHY-T Transmission oil additive for transmission oil in high-performance transmissions (off-road driving / extreme conditions) ExampleFilling quantity 2.0 liters = 1400 ml transmission oil according to manufacturer's specifications + 600 ml MATHY-T
Troubleshooting
50% MATHY-T Transmission oil additive for transmission oil in the event of stick shifting and excessive transmission noise. ExampleFilling quantity 2.0 liters = 1000 ml transmission oil according to manufacturer's specifications + 1000 ml MATHY-T
The dosing instructions must be observed.
Application
For vehicles with a mileage of more than 100,000 km, a cleaning phase should be carried out. To do this, drain 10% of the filling quantity from the old transmission oil and fill the removed quantity with MATHY-T again. If possible, change the transmission oil after 1,000 km when warm. After draining, fill the transmission with a mixing ratio of at least 1 : 20 = 20% MATHY-T and 80% new transmission oil according to the manufacturer's specifications.
Any questions ?
Our technical hotline will be happy to advise you: +49 (0)51 91 - 160 04
