MATHY-M is a high-performance engine oil additive that significantly increases the reliability of motorcycles. The addition of MATHY-M into the engine reduces wear many times over and increases the performance of the machine. Very suitable for motorcycles with oil bath/wet clutch. Also used in the 2009 world record run by Fritz W. Egli MATHY-M is free of solids and can be used in all engine oils on a mineral, semi-synthetic and fully synthetic basis or SAE classes 0 to 50.

These are your advantages

• Improves the lubricating film
• Reduces wear on the engine mounts
• Lowers the oil temperature
• Noise is reduced
• Minimization of vibrations
• Better starting behavior
• Prevents damage
• Best emergency running properties
• Very good corrosion protection
• Extends the service life of the motor

Dosage

For normal use 20% MATHY-M engine oil additive for engine oil under normal loads. (Touring motorcycles, cruisers and choppers)

Example: Total engine fill quantity 3.0 liters: 2.4 l engine oil according to manufacturer's specifications + 0.6 l MATHY-M

For heavy use 25% MATHY-M engine oil additive for engine oil under above-average loads (extreme conditions for racing bikes, supermoto, full-cross)

Example: Motor-Gesamtfüllmenge 3,0 l = 2,25 l Motoröl nach Herstellervorgabe + 0,75 l MATHY-M

For problems in the engine 30% MATHY-M engine oil additive for engine oil in the event of strong vibrations and excessive engine noise.

Example: Total engine fill quantity 3.0 l = 2.1 l engine oil according to manufacturer's specifications + 0.9 l MATHY-M

The dosing instructions must be observed.

Application