MATHY-M is a high-performance engine oil additive that significantly increases the reliability of car engines. The addition of MATHY-M into the engine reduces wear many times over and increases the performance of the machine. Since 1994 MATHY-M regularly tested and certified by TÜV and other institutes. MATHY-M is free of solids and can be used in all engine oils on a mineral, semi-synthetic and fully synthetic basis or SAE classes 0 to 50. Suitable for all gasoline and diesel engines, also with catalytic converter and diesel particulate filter.

These are your advantages

• Cleans the engine
• Reduces wear and tear
• Extends the service life of the motor
• Noise is reduced
• Better starting behavior
• Increases the compressive strength of the lubricating film
• Lowers the oil temperature
• Minimization of vibrations
• Prevents damage
• Best emergency running properties
• Very good corrosion protection
• Extension of oil change intervals possible*

Dosage

For normal use 10% MATHY-M Engine oil additive for engine oil under normal loads. Example: Total engine fill quantity 4.0 liters: 3600 ml engine oil according to manufacturer's specifications + 400 ml MATHY-M
For heavy use 20% MATHY-M Engine oil additive for engine oil with above-average loads (e.g. high loads, turbocharged engines, trailer operation, excessive short-distance operation, etc.) Example: Total engine filling quantity 4.0 liters = 3200 ml engine oil according to manufacturer's specifications + 800 ml MATHY-M
For problems in the engine 25% MATHY-M Engine oil additive for engine oil in the event of strong vibrations and excessive engine noise. Example: Total engine filling quantity 4.0 liters = 3000 ml engine oil according to manufacturer's specifications + 1000 ml MATHY-M

The dosing instructions must be observed.

Application

For car engines with a mileage of more than 20,000 km, a cleaning phase should be carried out. To do this, drain 10% of the filling quantity from the old engine oil and refill the removed quantity with MATHY-M. After 500 km to 700 km, change the old engine oil while it is still warm, if possible. After draining, fill the engine with a mixing ratio of at least 10% MATHY-M and 90% engine oil according to manufacturer's specifications. (For 4.0 liter filling quantity: 3600 ml engine oil according to manufacturer's specifications + 400 ml MATHY-M)

*Der mögliche Ölwechselintervall von bis zu 120.000 Kilometern bezieht sich auf einen, für den Motor optimalen normalen Fahrbetrieb und eine Fahrleistung pro Jahr von 40.000 km und mehr! Werden häufig Kurzstrecken (Strecken unter 20 Km) gefahren oder auch alternative Kraftstoffe verwendet, kann dies das Motorenöl negativ belasten. Daher den Ölzustand regelmäßig prüfen und im Zweifelsfall das Öl vorzeitig wechseln. Wir empfehlen einen kompletten Ölwechsel nach ca. 40.000 – 60.000 Km oder spätestens nach 4 Jahren.

{product id=3}